Search Results

appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd The eCHS is truly a beautiful stove. This one has FREVO tabs and creases. It is my favorite one so far.

Quote from odd man out: “Based on these number, they are not all that difference. However this assumes the heat available from methanol is somewhat lower than the SLX (50/50) I used. Maybe I can try some comparisons of same stove with different fuel sometime to nail down the effect of this variable. It may be that the FREVO stove would work better with EtOH. It is less volatile so that may cut down on the amount of fuel getting to the jets. appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1c…

Quote from odd man out: “Quote from BirdBrain: “I just ran a test on my latest eFREVO. I lit it a couple times before the boil test. As I suspected, the 0.5mm jets showed to much pressure. So I took a screwdriver to the creases and flattened them as much as I could. The flame was more stable and very blue. It still is not in balance. The amount of fuel being delivered to the hoop needs to be decreased. I am going to wait for a video on the FREVO or instruction from JSB before I tinker on this st…

I just ran a test on my latest eFREVO. I lit it a couple times before the boil test. As I suspected, the 0.5mm jets showed to much pressure. So I took a screwdriver to the creases and flattened them as much as I could. The flame was more stable and very blue. It still is not in balance. The amount of fuel being delivered to the hoop needs to be decreased. I am going to wait for a video on the FREVO or instruction from JSB before I tinker on this stove anymore. Here are my results. 16 oz (473ml) …

It is on YouTube now. Thank you TETKoba-san (would say sensei, but I do not know if it is proper. I think it would be if I understand the usage right). http://www.youtube.com/watch?v=zjeyT5wlQms And to those who are checking us out because of this video, let me introduce us to you. We are a mixed bag that love to hike and tinker. You will learn who likes what more. There is a lot of knowledge here and not just about stoves. We love to share and receive good ideas. So pull up a chair and join in …

I do not know effect of slanted creases or bent tabs. I am just trying to copy what JSB did. I know it looks pretty. I put JB Weld on top of the rim only as shown in the the eCHS Stove video by TETKoba.

Quote from TETKoba: “Quote from BirdBrain: “A triune quorum being reached, I am committing mutiny and giving my friends in Japan permission to post the video. Again, TETKoba, you are very kind and generous. I hope JBS loads a video to show how to build a real FREVO so I can learn his secrets too. All that come here will know that you 2 are the developers of this technology. Thank you. Feel free to load the video on YouTube. AppalachianTrailCafe.net, get ready for the influx of TETKoba fans. I ha…

appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd eFREVO 1.1 35mm height 21 creases 7 x 0.5mm jets Just needs JB Weld on rim.

appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd appalachiantrailcafe.net/index…264a2bfb47ba672699d3be1cd My eFREVO. I found some 0.5mm and 0.6mm bits today. I am going to do 3 things to slow this hot burning stove down. 1) I am going to increase the number of creases to 21. I remained convinced of the math that shows cross sectional area is reduced as the number of creases increase. 2) I am going to reduce the number of jets to 7. 3) I am going to reduce the jet diameter to 0.6mm. The e…

Quote from stoviewander: “Quote from TrafficJam: “Quote from stoviewander: “AK - 8.5 miles and 2000 feet of elevation gain would sound like quite a hike to most non-hikers. I was not able to hike anywhere near that distance when I started, but I had 240 pounds on my 5'11" frame.” Hiking changed my life. I wasn't physically able to hike more than 5 miles so started running to lose weight. That started an entire lifestyle change. I've lost 40 lbs and I'm working on the last 20. 49.gif” You are ahe…

A triune quorum being reached, I am committing mutiny and giving my friends in Japan permission to post the video. Again, TETKoba, you are very kind and generous. I hope JSB loads a video to show how to build a real FREVO so I can learn his secrets too. All that come here will know that you 2 are the developers of this technology. Thank you. Feel free to load the video on YouTube. AppalachianTrailCafe.net, get ready for the influx of TETKoba fans. I have one question for you TETKoba. What did yo…

Quote from max.patch: “ask forgiveness, not permission.” Okay. I am granting permission and blaming you.

Quote from TrafficJam: “Quote from BirdBrain: “Who is in charge here in the absence of our fearless leaders? I do not want to keep my friends in Japan waiting.” Since we are a democracy, I say we vote and I vote for you.” I know me better than you know me and as such I vote against me. :whistle: But thank you.

Who is in charge here in the absence of our fearless leaders? I do not want to keep my friends in Japan waiting.

HB, Rasty, or TW: There is a matter awaiting your approval in the alcohol stove thread. I do not want to be presumptuous.

Quote from TETKoba: “Quote from BirdBrain: “TETKoba, I do not have the ability to make a YouTube video. If my eFREVO Stove is worthy, feel free to make one and load it on your channel.” I've done the upload. Sorry for poor jets because this was my first time to build FREVO stove. https://www.youtube.com/watch?v=pdaDgmC7s2o The video is still limited open. I'll open to public after your acceptance.” I am waiting on permission from one of the site administrators. I am not an authority here. I appr…

This is how our friends from Japan found us. I hope they stick around. http://twitpic.com/e1asvi

Quote from stoviewander: “Quote from BirdBrain: “Quote from stoviewander: “Quote from BirdBrain: “Quote from stoviewander: “What is the best way to remove paint and polish an aluminum can? I am not sure I have the patience for jeweler's rouge. I tried a rotary steel brush, jeweler's rouge, and burnishing with the edge of a penny. The penny came closest to a mirror finish.” I use the yellow ones of these: http://www.thefind.com/hardware/info-3m-2%22-radial-bristle-discs http://www.youtube.com/wat…

I am tempted to buy these. I have never purchased products via eBay outside of the US. I can get the 3 sizes I want here. Anyone have an opinion of ordering overseas? http://www.ebay.com/itm/20x-Micro-Durable-Straight-Shank-Twist-Drill-Tiny-Spiral-Drill-Bits-0-6mm-LJN-/151227198325?pt=LH_DefaultDomain_0&hash=item2335d7eb75

Quote from stoviewander: “Quote from BirdBrain: “Quote from stoviewander: “What is the best way to remove paint and polish an aluminum can? I am not sure I have the patience for jeweler's rouge. I tried a rotary steel brush, jeweler's rouge, and burnishing with the edge of a penny. The penny came closest to a mirror finish.” I use the yellow ones of these: http://www.thefind.com/hardware/info-3m-2%22-radial-bristle-discs http://www.youtube.com/watch?v=jCs0nh-l8ms http://www.youtube.com/watch?fea…